Detailing Writeups, Travels

GlossWorks Detailed: 996 Turbo in Hong Kong

During this past month of January 2011, GlossWorks had the priviledge of visiting Asia to detail a couple Porsches in Hong Kong. Prior to the trip, I had to stress over the little details such as downsizing my products to fit into my suitcases and getting the equipment to work in a different country (thumbs up to www.voltageconverters.com for coming through on such short notice!). GlossWorks is no stranger to performing on-site mobile jobs around town, but detailing out of a suitcase in a foreign country is a whole other ballgame!

After all the stressing, GlossWorks finally arrived in Hong Kong in the middle of January. After scoping out the cars and the detailing site, I was ready to get to work! I will let the pictures do the rest of the talking…

Space is limited in Hong Kong but at least there was a small space dedicated for car washing.

Started out by focusing on the small details.

The built up dirt around the emblems is going to take some work.

The brake dust around the lugs had etched into the paint.

Looking much better after some TLC.

With all the little details out of the way, it was time for a hand wash with a genuine sheep-skin mitt.

After drying, the defects in the paint were evident.

Random scratching on front bumper.

Rear bumper had a very evident scratch that took off quite a bit of clear coat.

Swirls on all panels of the car.

More swirling on rear fender.

The swirling on the doors were not as bad.

Taped off half the hood to test out the pad/polish combo for this car.

Buffing off the polish residue to inspect the work. (Video to come on 50/50 spot of the hood.)

Rear panel by the decklid had some major swirls and scuffing.

After the first step of compounding before paint was refined. Right side done, left side untouched.

Switching to a smaller pad for the little areas.

After a full day of polishing, refining and the application of a sealant, the car was a ready for a washdown to remove all the polishing dust.

Car was then dried and it was time to check my work.

Paint is now showing more depth.

After finishing the little details on the second day, it was time for a photoshoot.

Reflections are much deeper than before.

As usual, I will end off with my favourite picture!

Thanks for looking and please leave a comment if you enjoyed this writeup!
To check out the other Porsche detailed in Hong Kong, please follow this link: 993 Porsche Turbo

6 thoughts on “GlossWorks Detailed: 996 Turbo in Hong Kong

  1. Incredible work! Yet another amazing detailing!

    That is why I only trust my car with GlossWorks, exceptional customer service and the work leaves you speechless!

  2. Terence yet another job well done! It’s amazing how you were asked to work on this car in Hong Kong! By the looks of all these photos I’m not surprised why, since your so great at what you do! Looking forward to seeing more of your work overseas and good luck with business. The sun is slowly coming around, more cars are gonna need your TLC! Take cares =)

Leave a Reply

Your email address will not be published. Required fields are marked *